Your tires are the only part of your car that interacts with the road. If they’re underinflated, they not only cost you gas but can make your car handle unsafely. While almost every car sold has an internal system that reports an approximate tire pressure, the best tire pressure gauges will give you an instant, accurate real-time measure of your car’s tire pressure.
Having the right gauge will also account for nuances in different situations. Like if you drive a heavy-duty truck with high-PSI tires. If you have a 4×4 and need to air down (a.k.a. let air out), and air back up frequently. Or, if your sporty car has wheels with an ornate pattern that make accessing the valve a minor-surgery-level chore.
To find the best gauges, we monkeyed with a handful. A few didn’t make the cut, because the build felt flimsy or they were too awkward to get a consistent reading. We tested a few well-loved brands for quality, using them on a bunch of different cars with various wheel sizes, motorcycles, and side-by-sides. We wanted to hit the latter so we could be sure they were measuring accurately at lower and higher pressures.
During our testing, we found five models of gauges — from dirt cheap to fancy — that measure within a single PSI of each other. Is there a “perfect” gauge? Not that we found, but there’s the right tool for the right application, and that’s what we detail here. This guide will help you find the perfect tire pressure gauge, considering primary uses, user-friendliness, and budget. To wrap up our thorough analysis, you’ll find our helpful comparison chart, buyer’s guide, and price & value sections at the end of the guide.
Editor’s Note: We updated this article on August 20, 2024, adding more tips and advice to our buyer’s guide content.
The Best Tire Pressure Gauges of 2024
- Best Overall Tire Pressure Gauge: WINTERS Tire Pressure Gauge, 100 PSI
- Best Budget Tire Pressure Gauge: Slime 5-50PSI Pencil Gauge
- Best Tire Pressure Gauge for Off-Roading: ARB ARB505 Deflator Kit 10-60 PSI
- Best Tire Pressure Gauge for Complex Wheels: AutoMeter Hoonigans 60 PSI
- Easiest-to-Read Tire Pressure Gauge: Slime Elite HD Gauge
WINTERS Tire Pressure Gauge, 100 PSI
Specs
- Materials Stainless steel, plastic
- Build Rubber dial guard and metal stem with bleeder
- Best For Easy use in snug spaces and in-car stowage
Pros
- Straight-style stem
- Smaller dial at 2 PSI increments
- Analogue gauge needs no battery
Cons
- The angle of the stem can make it tough to access valves of specific wheels
Slime 5-50PSI Pencil Gauge
Specs
- Materials Metal and plastic
- Build Straight pen-style reader
- Best For Open wheel designs and just-in-case application
Pros
- Can live in any car
- 5-50PSI reading at 1-PSI increments
- Analogue gauge needs no battery
Cons
- Tough to access some wheel designs
ARB ARB505 Deflator Kit 10-60 PSI Tire Pressure Gauge
Specs
- Materials Brass and stainless steel
- Build Rubber dial guard and braided fabric hose
- Best for Off-roading, accurately airing down your tires, field checking PSI
Pros
- Over-built and tank-like
- Hose-style design makes accessing valves easy
- Both reading pressure and airing down operations are the best available
- Analogue gauge needs no battery
Cons
- More complex than a gauge alone
- Too big for glove-box storage
AutoMeter Hoonigans 60 PSI Tire Pressure Gauge
Specs
- Materials Metal and plastic
- Build Rubber dial guard and braided fabric hose
- Best For Access to valves on spoked or enclosed wheel patterns
Pros
- Small chuck on 13.75-inch braided line tucks easily into wheels
- Easy-to-read dial at 2.5 PSI increments
- Analogue gauge needs no battery
Cons
- The plastic case is too oversized for easy storage
- 60PSI max reading
Slime Elite HD Gauge
Specs
- Materials Plastic
- Build Straight-down chuck design
- Best For Reading in dark conditions or lousy weather
Pros
- Can live in any car
- 0-99PSI reading at 1-PSI increments
- Bright digital gauge
Cons
- Batteries fail
- Housing can be slippery with sweaty or wet hands
Tire Pressure Gauges Comparison Chart
| Tire Pressure Gauge | Price | Display | Hose | Bleeder |
|---|---|---|---|---|
| WINTERS Tire Pressure Gauge, 100 PS | $35 | Analog | No | Yes |
| Slime 5-50PSI Pencil Gauge | $5 | Analog | No | No |
| ARB ARB505 Deflator Kit 10-60 PSI Tire Pressure Gauge | $54 | Analog | Yes | Yes |
| AutoMeter Hoonigans 60 PSI Tire Pressure Gauge | $42 | Analog | Yes | Yes |
| Slime Elite HD Gauge | $24 | Digital | No | No |
How We Tested Tire Pressure Gauges
The GearJunkie staff has been writing about and covering cars for a few decades. We have gotten our hands greasy with everything from old MGs and VWs to older motorbikes—and with a lot of bicycles and e-bikes, too.
As a major part of his career critiquing and test-driving cars, as well as motorcycles and bicycles, inflating (and deflating) tires has frequently been a component of main tester Michael Frank’s evaluation work. But he also loves old motos, bikes, and cars.
As a result, he’s usually elbow-deep in bringing some rusted heap back to life or keeping it going. This typically means swapping wheels or rubber somewhere along the way. And he’s been off-road plenty, airing down and back up as the terrain demands.
While testing for this article, we considered how well each gauge performed and who they were designed for. For instance, if you’re going off-roading, you want a tool that makes airing down your truck or 4×4 tires easier and well-controlled.
That’s what the ARB on our list offers because it remains attached to the valve without holding it there. By contrast, if you’re the average driver who just wants a widget to throw in your glovebox, what do you actually need? What’s not going to be a pain to use? This was in the heads of our testers, too.
We tested all of the devices thinking about dexterity and field use. Because there’s a chance you might be standing beside the road (or no road at all) in a rainstorm, in the mud, pulling a spare tire out of a trunk and wondering if it has any air at all or airing back up after off-roading.
We also wanted an oversized, readable gauge. If it’s dark out when you’re on your knees trying to get the gauge to work, a bigger, readily readable face is preferable. We really liked the round-shaped gauges a lot, especially if they had a grippy frame, because being able to grasp the gauge and press the chuck onto the valve stem helps a lot.
Overall, we tried to find a tire pressure gauge for everyone, from the off-roader to the person who hopes they never have to use it.
How to Choose the Best Tire Pressure Gauge
When thinking about a tire pressure gauge you want a device that’s versatile enough to measure a bicycle tire, an ATV, or anything up to something like a heavy-duty truck. Do you need a bleeder valve? If you overfill your tire, this allows you to easily remove air with the gauge still attached and reading to let you hit your mark precisely.
You may want a more specialized device. The ARB ARB505 Deflator Kit allows very precise airing down, and the reason for that is that if you 4×4 regularly you get significantly more traction at lower pressures: You’re both increasing the contact patch of the tire and also the friction of it and its ability to conform to the off-road surface. To do that, you need the kind of tool that not only keeps reading as you air down but also stays attached to the valve, which is why a thread-on style (rather than one that you just hold against the valve stem) offers way better control.
Regardless of how you plan to use your tire pressure valve, it’s important to know the basic features to look for.
Chuck
The part that attaches to the valve (which is where you add air). A chuck either threads on or just presses onto the tire valve.
Bleeder
This enables you to extract air from a tire while (ideally) still having the gauge attached, so that you can keep reading the PSI as you air down. You want to be able to see that pressure drop on the face or indicator or dial.
Housing
You want one that provides a grippy exterior (i.e., the housing), like the AutoMeter Hoonigans 60 PSI Tire Pressure Gauge. There’s a Goldilocks case to be made for a not-too-big unit, too, especially if you plan to travel with the gauge and keep it in your car. Are you off on an adventure or just need a basic way to check tire pressure?
Analog vs. Digital Display
We prefer analog and battery-free, like the display on the WINTERS Tire Pressure Gauge. Digital models like the one on the Slime Elite HD Gauge are much easier to read, but they aren’t necessarily more accurate. And they require power, meaning they might not work when you really need them to.
Chuck Style
We liked a few of the models that threaded the chuck to a hose rather than directly to the housing, because they’re easier to fish the chuck to the valve. If you’re dealing with a very ornate BBS wheel on your vintage Mercedes-Benz or maybe the tucked-in valve of your John Deere riding mower, the biggest pain point is just getting the chuck to attach. This is why a thread-on style is handy. Though again, that doesn’t necessarily mean there’s enough room in your machine’s wheel design to operate one.
Angled Chucks vs. Straight-Down Ones
What are you driving, riding, or operating? An angled chuck enables easier access, but a straight-down one lets you apply more pressure to get a more accurate reading. There’s no “right” or perfect gauge. It has more to do with the machine you’re using, the wheel design, and access to the valve.
Pen Style
This isn’t necessarily the easiest version here, but we include Slime 5-50PSI Pencil Gauge because they’re reasonably accurate, user-friendly, and small enough to store in any glove box.
Price & Value
While tire pressure gauges serve the same basic purpose, their cost can vary wildly from gauge to gauge. Depending on your needs, you can spend anywhere from less than five bucks for a no-frills pen-style gauge that only reads tire pressure to over $50 for a gauge with an LED monitor and precision deflation features.
To ensure that you don’t buy more tire gauge than you need, know how you intend to use your gauge and what features you will (and won’t) use.
Budget
On the lower end of the price spectrum is the Slime 5-50PSI Pencil Gauge ($5). This space-saving device is the size of a pencil (hence the name), and it measures tire air pressure and… actually, that’s pretty much it. If all you need is a way to make sure your tires are inflated to the right PSI, this is a good way to go.
Mid-Tier
If you need a few more features, many of the middle-of-the-road options can cost anywhere from $20 to around $40. Gauges like our favorite, the WINTERS Tire Pressure Gauge, 100 PSI ($35), offer amenities like higher PSI measurements and angled heads to help users navigate intricate aftermarket wheels. Plus, gauges in this range can also offer bleeder valves to help you dial in the exact PSI that you need.
Premium
Looking for something beefier? Expect to spend $50 or more. Higher-end options, like the ARB ARB505 Deflator Kit 10-60 PSI Tire Pressure Gauge ($54), have mid-tier standards like a bleeder valve for airing down and an angled head as well as other features like a hose attachment to make it even easier to reach your valves. Plus, it’s durable to the point of feeling overbuilt. Options like these are often designed for specific uses, like offroading, in which airing up and down tires is common.
If your car is relegated to city streets and you just want to keep your tires inflated properly, there probably isn’t a reason to kick down more than a few bucks for a pencil gauge. But if you’re running high-end tires that require a very specific PSI or you tend to drive off-road as much as on it, consider a mid-tier or premium option.
Frequently Asked Questions
We didn’t find much variation by kind or even price. However, larger models were generally easier to handle, which made getting an accurate reading in one more straightforward.
What’s your budget and what’s your use case?
If you off-road regularly, you’re getting the most overbuilt unit you can find. You definitely want one that enables bleeding air accurately with the gauge still attached to the tire’s valve stem, so that you can drop PSI steadily and precisely.
If you’re just checking the pressure every few months, get the stick style, save some coin, and move on with your life.
Somewhere in the middle is a simple design with an analog dial-style face that makes the job easier. And we’d add, depending on what you drive, cycle, or moto on, you might want one that reads to very high PSI or very low PSI.
Not that we found. The Slime digital gauge we tested was about as accurate as the analog models within about 1 psi. But we will say we have a bias against digital because we tend not to remember to check the battery life of the devices in our life until they’re fried. We want a gauge to work in the field in the worst-case scenario, especially when hunting down a battery is another headache we don’t have time or even the option for.
The Best Car Battery Chargers of 2024
Having a good car battery charger is a wise decision for any household. Here are our choices, plus key things to look for.
The Best Car Phone Mounts of 2024
A good car phone mount can minimize distractions while driving. Here are our favorite car phone mounts of 2024.
