All-mountain snowboards are like hot sauce — they’re good on just about anything. From aggressive carving over groomers to carefree floating through powder, the boards featured on this list offer true quiver-of-one versatility.
Though the definition of “all-mountain” varies by retailer and brand, all of the snowboards on this list perform well across a broad range of riding styles and snow conditions.
There are lots of excellent snowboards on the market, and innovative models are introduced with each upcoming season. To compile this list, we sifted through the crowded field and selected only the very best all-mountain snowboards of the season.
Our extensive list includes powder-leaning models, park-friendly prize winners, and everything in between. No matter your budget or riding preferences, we’re confident this list includes the perfect all-mountain snowboard for you.
If you’d like to learn more about all-mountain snowboards and their features, jump down to our buyer’s guide and FAQ at the bottom of this article. Make sure to check out our comparison chart to help steer your decision-making. Also, feel free to scroll through and check all of our recommended buys.
Editor’s Note: We updated our All-Mountain Snowboards buyer’s guide on November 21, 2023, with a fleet of freshly tested snowboards.
The Best All-Mountain Snowboards of 2024
- Best Overall: Stranda Descender for women & men’s CAPiTA Defenders of Awesome
- Best Budget: Burton Stylus Flat Top Snowboard for women & men’s Arbor Element Camber
- Best Runner-Up: GNU Ladies Choice for women & men’s CAPiTA Defenders of Awesome
- Best for Beginners: Lib Tech Cortado C2 for women & men’s Burton Custom Flying V
- Best Powder-Leaning: Jones Women’s Flagship Snowboard for women & men’s Ride Warpig
- Best Freestyle-Leaning: Never Summer Infinity for women & men’s YES. Typo
- Best for Carving: Rossignol After Hours Snowboard for women & men’s GNU Essential Service
Stranda Women’s Descender Snowboard
Specs
- Profile Parabolic camber (4mm) with slight rocker in the tip and tail
- Shape Directional
- Flex 7 (moderately stiff)
- Base Sintered 4001 Durasurf
- Sizes (cm) 152, 148
Pros
- Traverses with a champion grip
- Easy to steer through tight terrain
- Stout yet poppy for variable or deep snow
Cons
- Directional shape doesn’t excel at riding switch
- Huge sweeping turns aren’t as fun with this shape
Burton Stylus Flat Top Snowboard
Specs
- Profile Camber to rocker on the ends
- Shape Twin
- Flex 2 (soft)
- Base Extruded
- Sizes (cm) 138, 142, 147, 152
Pros
- Easy to control
- Slow, non-grabby edge-to-edge transfer alleviates quick catches
Cons
- Does not wrestle steep, rough, challenging terrain or love higher speeds
- Channel board mount is directly compatible with Burton bindings. Otherwise, you’ll need specific additional hardware to connect bindings to the board
GNU Ladies Choice
Specs
- Profile C2x profile is rocker between feet, camber beneath feet, rocker on ends
- Shape Asymmetric
- Flex 5 (medium)
- Base Sintered
- Sizes (cm) 139.5, 142.5, 145.5, 148.5, 153.5
Pros
- Magne-Traction edge hold
- Lightweight core
- Well-rounded
Cons
- Not the stiffest for aggressive carving
Lib Tech Cortado C2
Specs
- Profile C2 profile is rocker between feet, camber beneath feet, rocker on ends
- Shape Directional
- Flex 7 (medium-stiff)
- Base Extruded
- Sizes (cm) 142, 145, 148, 151, 154
Pros
- Magne-Traction edge hold
- Partially stiffer fiberglass for moderate give
Cons
- Not the parkiest board in the lot
- No upgrade to the C2x
Jones Women’s Flagship Snowboard
Specs
- Profile Directional rocker (more tip rocker than tail rocker, camber between bindings)
- Shape Directional
- Flex 8 (stiff)
- Base Sintered
- Sizes (cm) 146, 149, 152, 155
Pros
- Fast-charging with no give
- Rips high-angle slopes
Cons
- Less playful for mellow spring days
Rossignol After Hours Snowboard
Specs
- Profile Rocker-camber blend
- Shape Directional twin
- Flex 7 (medium-stiff)
- Base Sintered
- Sizes (cm) 145, 149, 153, 156
Pros
- Queen for big turns
- Handles high speeds
Cons
- Not your jib stick or pipe vehicle
Never Summer Infinity
Specs
- Profile Wide rocker between feet, camber under feet, gradual rise in tip and tail
- Shape Directional
- Flex 5 (medium)
- Base Sintered
- Sizes (cm) 142, 145, 148, 151
Pros
- Durable for the long haul
- Playful yet dependable on hardpack
Cons
- The Vario Power Grip sidecut utilizes extra contact points, but we prefer the serrated edge of Magne-Traction
- Not the ideal powder board
CAPiTA Defenders of Awesome
Specs
- Profile Camber between the feet, rocker in the tip and tail
- Shape Twin
- Flex 5 (medium)
- Base Sintered
- Sizes 148, 150, 152, 153W, 154, 155W, 156, 157W, 158, 159W, 160, 161W, 162, 163W
Pros
- Versatile
- Stable
- Lots of pop
Cons
- Aggressive handling takes some getting used to
Arbor Element Camber
Specs
- Profile Traditional camber
- Shape Directional twin
- Flex 4 (medium soft)
- Base Sintered
- Sizes 153, 156, 159, 160MW, 161W, 162, 165W
Pros
- Great value
- High-quality construction
Cons
- Chatters at high speeds
Burton Custom Flying V
Specs
- Profile Ambered underfoot with rocker between the feet
- Shape Directional twin
- Flex 3 (soft)
- Base Sintered
- Sizes 150, 154, 154W, 156, 158. 158W, 162, 162W, 166W 158W, 162, 162W, 166W
Pros
- Fun and forgiving ride
- High-quality edge and base materials
Cons
- Not ideal for aggressive carving or riding at high speed
Ride Warpig
Specs
- Profile Directional rocker
- Shape Tapered and directional
- Flex 4 (medium soft)
- Base Sintered
- Sizes 142, 148, 151, 154, 158
Pros
- Versatile
- Playful
- Good value
Cons
- Not the best for long radius turns at high speeds
GNU Essential Service
Specs
- Profile Rocker-camber hybrid
- Shape Directional twin
- Flex 7 (medium-stiff)
- Base Sintered
- Sizes 155, 157, 158W, 159, 160W
Pros
- Excellent edge hold on hard surfaces
- Top-notch carving ability
- Super fast
Cons
- Aggressive handling is not ideal for beginners
YES. Typo
Specs
- Profile Rocker-camber hybrid
- Shape Directional twin
- Flex 5 (medium)
- Base Sintered
- Sizes 149, 152, 155, 156W, 158, 159W, 161, 163W
Pros
- Capable of hitting big jumps and freestyle features
- Versatile
Cons
- A bit squirrely and chattery at high speeds
Women’s Weston Riva
Specs
- Profile Camber to slightly rockered in the tip and tail
- Shape Directional
- Flex 7 (out of 10, which is the stiffest)
- Base Sintered
- Sizes (cm) 143, 147, 151, 155
Pros
- Digs into and edges hardpack well
- Enjoys speed
Cons
- Not the best damping when you hit chunder at high speed
Rossignol Diva
Specs
- Profile Traditional camber under foot, early rise at tip and tail
- Shape Twin
- Flex Moderate-Stiff, 8
- Base 7500 Sintered
- Sizes (cm) 140, 144, 148, 152
Pros
- Powerful
- Stiffer for no mess-around
- A lovely yet aggressive tool for charging
Cons
- Pricier
- More aggressive design
Jones Women’s Stratos
Specs
- Profile Directional rocker
- Shape Tapered directional
- Flex Stiffer, 8
- Base 3D Contour Base
- Sizes (cm) 143, 146, 149, 152, 155
Pros
- Eats up ice, steeps and speed
Cons
- Not playful
Women’s Ride Psychocandy
Specs
- Profile Flat to rocker in the tip and tail
- Shape Directional
- Flex 5 (medium)
- Base Sintered
- Sizes (cm) 138, 142, 146, 150, 154, 158
Pros
- Rise in the tip and tail provides playful garnish
- Very strong build
Cons
- Less lovable in tight trees
Jones Dream Weaver
Specs
- Profile Directional rocker
- Shape Tapered Directional
- Flex Friendlier, 4-5
- Base 3D Contour Base, Sintered 8000 Base
- Sizes (cm) 139, 142, 145, 148, 151, 154, 156
Pros
- Plenty of lengths to choose from
- Soft-to-moderate flex
- Straightforward ride for everyday rides
Cons
- Not the most premium build
- If you're an expert, check out a different board
Women’s Arbor Swoon Rocker
Specs
- Profile Rocker
- Shape Directional twin
- Flex 5 (medium)
- Base Sintered
- Sizes (cm) 140, 144, 148, 152
Pros
- Fairly lightweight build utilizing strong Paulownia wood
- Playful yet stout
Cons
- Rocker can feel too loose for some
Women’s YES. Hello
Specs
- Profile Rocker/camber/rocker
- Shape Directional twin
- Flex 6 (medium-stiff)
- Base Sintered
- Sizes (cm) 146, 149, 152, 155
Pros
- Handles turns well
- Fun in powder
Cons
- Not a top-shelf option for park laps
- Less of a speed demon
Stranda Biru
Specs
- Profile Full camber with early-rise nose and tail kick
- Shape Directional, volume-shifted
- Flex Moderate, 6
- Base Sintered Durasurf 4001
- Sizes 154, 157
Pros
- Volume-shifted nose excels in powder
- Playful flex pattern
- Versatile enough for a one-board quiver
Cons
- Softer than advertised
- Demands power to carve well
Jones Snowboards Freecarver 9000s
Specs
- Profile Full camber
- Shape Directional
- Flex Moderate, 6
- Base 3D Contour Base 2.0
- Sizes 152, 156, 160, 164
Pros
- Almost no chatter at speed
- Blasts through chop and crud
- Solid edge hold nose to tail
Cons
- Too niche to be a daily driver for most
- Demands power to carve well
WNDR Alpine The BellAire
Specs
- Profile Camber with rockered out nose
- Shape Directional
- Flex Moderate-to-Stiff
- Base N/A
- Sizes (cm) 148, 152, 156, 159, 164
Pros
- Capable in a wide range of conditions
- Playful flex pattern
- Versatile enough for a one-board quiver
Cons
- Sluggish factory tune
- Narrow for carving for larger riders (via the 159 size)
Men’s Jones Mountain Twin
Specs
- Profile Camber under foot, rocker through the tip and tail
- Shape Directional twin
- Flex 7 (medium stiff)
- Base Top-notch sintered base
- Sizes 151, 154, 156W, 157, 159W, 160, 162W, 163, 165W, 168W
Pros
- Versatile
- Damp and smooth ride
- Very durable base
Cons
- Not ideal for beginners
Men’s Arbor Foundation
Specs
- Profile Rocker
- Shape Directional twin
- Flex 3 (medium soft)
- Base Extruded
- Sizes 148, 152, 155, 156MW, 158, 159MW, 161, 162MW
Pros
- Fun to ride
- Great for beginners
Cons
- Chatters at high speeds
- Not ideal for aggressive carving
Never Summer Swift
Specs
- Profile Rockered nose with camber underfoot
- Shape Directional
- Flex 7 (medium-stiff)
- Base Sintered
- Sizes 157, 162
Pros
- Excellent in powder
- Versatile
Cons
- Not ideal for hardpack and ice
All-Mountain Snowboard Comparison Chart
Scroll right to view all of the columns: Price, Profile, Shape, Flex, Sizes.
All-Mountain Snowboard | Price | Profile | Shape | Flex | Sizes |
W – Stranda Descender Snowboard | $679 | Camber, rocker | Directional | 7 (medium) | 152, 148 |
W – GNU Ladies Choice | $630 | C2x profile | Asymmetric | 5 (medium) | 139.5, 142.5, 145.5, 148.5, 153.5 |
W – Burton Stylus Flat Top Snowboard | $400 | Camber to rocker | Twin | 2 (soft) | 138, 142, 147, 152 |
W – Lib Tech Cortado C2 | $530 | C2 | Directional | 7 (medium-stiff) | 142, 145, 148, 151, 154 |
W – Jones Flagship Snowboard | $700 | Directional rocker | Directional | 8 (stiff) | 146, 149, 152, 155 |
W – Rossignol After Hours Snowboard | $580 | Rocker-camber blend | Directional twin | 7 (medium-stiff) | 145, 149, 153, 156 |
W – Never Summer Infinity Snowboard | $550 | A mix of wide, camber, & gradual | Directional | 5 (medium) | 142, 145, 148, 151 |
M – CAPiTA Defenders of Awesome | $500 | Camber, rocker | Twin | 5 (medium) | 148, 150, 152, 153W, 154, 155W, 156, 157W, 158, 159W, 160, 161W, 162, 163W |
M – Arbor Element Camber | $500 | Camber | Directional twin | 4 (medium soft) | 153, 156, 159, 160MW, 161W, 162, 165W |
M – Burton Custom Flying V | $660 | Camber, rocker | Directional twin | 3 (soft) | 150, 154, 154W, 156, 158. 158W, 162, 162W, 166W 158W, 162, 162W, 166W |
M – Ride Warpig | $530 | Directional rocker | Tapered and directional | 4 (medium soft) | 142, 148, 151, 154, 158 |
M – GNU Essential Service | $500 | Rocker-camber | Directional twin | 7 (medium-stiff) | 55, 157, 158W, 159, 160W |
M – YES. Typo | $500 | Rocker-camber | Directional twin | 5 (medium) | 149, 152, 155, 156W, 158, 159W, 161, 163W |
W – Weston Riva | $624 | Camber to rocker | Directional | 7 (medium-stiff) | 143, 147, 151, 155 |
W – Rossignol Diva | $580 | Camber | Twin | 8 (medium-stiff) | 140, 144, 148, 152 |
W – Jones Stratos | $630 | Directional rocker | Tapered directional | 8 (stiff) | 143, 146, 149, 152, 155 |
W – Ride Psychocandy | $520 | Flat to rocker | Directional | 5 (medium) | 138, 142, 146, 150, 154, 158 |
W – Jones Dream Weaver | $500 | Directional rocker | Tapered Directional | 4-5 (Friendlier) | 139, 142, 145, 148, 151, 154, 156 |
W – Arbor Swoon Rocker | $550 | Rocker | Directional twin | 5 (medium) | 140, 144, 148, 152 |
W – YES. Hello | $500 | Rocker/camber/rocker | Directional twin | 6 (medium-stiff) | 146, 149, 152, 155 |
Stranda Biru | $690 | Camber, rocker | Directional, volume-shifted | 6 (medium-stiff) | 154, 157 |
Jones Snowboards Freecarver 9000s | $630 | Full camber | Directional | 6 (medium-stiff) | 152, 156, 160, 164 |
WNDR Alpine The BellAire | $699 | Camber, rocker | Directional | Moderate-to-Stiff | 148, 152, 156, 159, 164 |
M – Jones Mountain Twin | $550 | Camber, rocker | Directional twin | 7 (medium stiff) | 151, 154, 156W, 157, 159W, 160, 162W, 163, 165W, 168W |
M – Arbor Foundation | $400 | Rocker | Directional twin | 3 (medium soft) | 148, 152, 155, 156MW, 158, 159MW, 161, 162MW |
M – Never Summer Swift | $685 | Rocker, camber | Directional | 7 (medium-stiff) | 157, 162 |
How We Tested All-Mountain Snowboards
Our snowboard crew of GearJunkie product testers and writers includes a range of experience levels from intermediate to expert snowboarders. We have backcountry splitboarders — with AIARE 2 certifications — and backcountry snowmobilers in the field. We meet for an annual gear testing week to swap notes, too, including a recent ski week at Crested Butte Mountain Resort in Colorado, which is known for extremely steep terrain.
Leading the gear testing, SnowSports Senior Editor Morgan Tilton has been snowboarding since 2002, when she switched from skiing on two planks to one, which she’d been doing since age 4 at Telluride Ski Resort in her hometown. Over the years, she’s competed in Slopestyle, backcountry tours, pow surfs, and still pulls on skis. While she coordinates the testers, she gets out in the field as much as possible with 24 days, or 74 cumulative hours, of snowboard testing to date for the year of 2023.
Editor Austin Beck-Doss has been snowboarding since 2005. Contributing photographer Eric Phillips is a formerly certified Level II PSIA-AASI instructor and big mountain pow surfer when he’s not at the resort or on splitboard tours.
We’ve tested snowboards in a range of conditions from California to the Colorado Rockies and high-alpine environments. Our snowboards have carved steep, groomed, icy terrain, wiggled through tight trees, and floated through deep powder.
While testing all-mountain snowboards we consider versatility, stability, flex, stiffness, carveability, edge hold, and overall value. We also take into consideration the most novel, style-specific, popular, highly rated, and legacy products across a range of price points.
The Best All-Mountain Snowboards: A Buyer’s Guide
What Is an All-Mountain Snowboard?
All-mountain snowboards are designed to handle various riding styles and types of terrain. A true all-mountain snowboard will perform relatively well on groomers, powder, hardpack, and everything in between.
If you’re the kind of rider who likes to mix it up and hit the park on one run and a powder stash on the next, an all-mountain snowboard is the right choice for you.
All-mountain snowboards are also well-known for their value. Instead of owning multiple specialist boards for different styles and conditions, a single all-mountain board can be your answer to everything — kind of like a Swiss Army knife.
Because these boards aren’t specialists, they generally make some compromises in order to work well all over the mountain. For example, a good all-mountain board should ride well in the powder, but it probably won’t perform quite as well as an aggressively directional powder surfing specialist.
Types of All-Mountain Snowboards
On this list, we’ve included many types of all-mountain snowboards. Each leans toward a certain style of riding. For example, our pick for best powder-leaning all-mountain snowboard will certainly rip all over the mountain, but it will truly shine when riding pow. We’ve also included freestyle-leaning all-mountain snowboards and hard-carving all-mountain snowboards.
Powder-Leaning All-Mountain
Powder-leaning all-mountain snowboards are the perfect tool for the deepest of days. Generally, snowboards in this category have a directional shape with a large, wide nose and a tapered-down tail. This is the ideal shape for maximum float in untouched snow.
Additionally, powder-leaning all-mountain snowboards usually have a rockered or hybrid rockered profile, which creates lift and keeps you happily afloat. On this list, the Ride Warpig and the Jones Women’s Flagship are our favorite boards for riding powder.
Freestyle-Leaning All-Mountain
Freestyle-leaning all-mountain snowboards will display their full potential in the terrain park. Designed with jumps, rails, and side hits in mind, these boards feature ample pop, skate-like snap, and stability to stick the landing in style.
Most freestyle-leaning snowboards have a true twin or slightly directional twin shape. Boards in this category tend to have relatively flat or mildly rockered profiles, though there are some exceptions to this. On this list, our favorite freestyle-leaning boards are the Never Summer Infinity Snowboard and the YES. Typo.
Snowboard Profile and Shape
A snowboard profile is the silhouette of a snowboard when viewed from the side if you were to set the board flat on a table and look at it lengthwise.
The profile is technically separate from the snowboard’s overall shape, but it’s also an ingredient that influences the shape category a board lands in — like adding cilantro or jalapeño to guacamole.
Imagine looking straight down at a snowboard that’s flat on the ground. The board’s shape is literally its outline, which is defined by the width from any side-to-side point, as well as the frame of the nose and tail.
Together, the board’s shape and profile create a unique feel underfoot. The various shape categories for snowboards listed below (directional, true twin, directional twin, asymmetrical, asymmetrical twin) are based on the profile and shape as well as the core materials and the flex they create.
Types of Snowboard Profile
Camber
This is the most traditional, old-school snowboard profile. With a cambered design, the center rises and the far ends of the board meet the ground where the nose and tail upturn. The sides curve upward a bit, too.
A camber board offers excellent edge control and a precise, aggressive, stable ride.
Rocker
Rocker is the opposite of camber, and it’s often called reverse camber. Lib Tech started this revolution with the original Skate Banana rocker board, so some folks refer to this feature as “banana technology.” It is a banana shape!
Instead of camber, the belly of the board presses into the ground, so it’s a convex or U-shape. The result is a superb float in powder, a more forgiving edge-to-edge experience, and a more surf-life experience in carves.
Flat
Flat is straightforwardly flat. But without the camber and upturned edges, those can more easily catch. But a flat segment of a board does provide a loading zone for popping as well as a great surface connection for rails or other jibs.
Hybrid Rocker/Camber
Some riders prefer the stability of camber or flat with the playfulness of rocker. There are countless combinations of these two profiles across nearly every brand.
One hybrid, for instance, is to have rocker between the feet, camber underfoot, and rocker on the nose and tail — a mustache, if you will. Others have a dual combo of flat or camber underfoot followed by a healthy dose of rocker throughout the nose and tail (or vice versa). But some have a tiny bit of rocker toward the tip and tail.
These incremental differences give each board a unique personality on the mountain and plenty of options for riders.
Types of Snowboard Shapes
Directional Snowboards
With a directional design, the nose is a different shape than the tail and has unique attributes. Generally, this means the tail is more rigid, providing an anchor when cruising fast. And the nose more easily lifts through clouds of powder.
True Twin Snowboards
If you were to draw a line across the centermost width of the board and fold it in half, each side would be the same. This design has a symmetrical shape (including the nose and tail and sidecut radius), flex pattern, and profile. The stance is completely centered.
A twin setup is an ideal choice for riding switch, which lends itself to freestyle terrain or park tricks, but can also be a very balanced feel for all-mountain terrain.
Directional Twin Snowboards
A directional twin is when there’s a slight variation on a twin design. So, the shape is nearly completely symmetrical with the same sidecut, flex, and profile for the nose and tail — except there’s a spin on an ingredient or two.
For instance, the profile could slightly differ between the nose and tail. The tail might have a stiffer core and flex compared to the nose. Possibly, the stance is setback rather than completely centered. Or, the nose could have a bit more rise for nice float.
Asymmetrical Snowboards
You know how the front of your body is proportionately different from its backside? An asymmetrical snowboard aims to help balance the human body, and it certainly feels different and fun to ride.
There are two ways asymmetry can be introduced in a board. A snowboard can have an asymmetrical sidecut, meaning the heel side is shorter and deeper. In contrast, the toe side is longer and shallower. This allows for easier, more balanced edge transfer between the toes and heels.
Some snowboard designs alter the core with softer materials beneath the heels along the backside of the board, compared to firmer materials along the toeside portion. Other designs blend both an asymmetrical sidecut and core.
Asymmetrical Twin
This design combines asymmetrical design features with twin features. The nose and tail will have the same shape, profile, and flex. But the toeside and heelside sidecut will differ, or the flex of the core material will differ between the toe and heel edge, or both.
Core Construction and Materials
A snowboard’s construction and materials fundamentally affect its riding ability and performance. Everything from flex to pop is a result of the various components the board itself is made from.
Perhaps the most foundational part of every snowboard is the core. Most cores are made from strips of poplar, bamboo, birch, or aspen wood. These strips are laid out from tip to tail and are pressed into a structural length of flexible plywood.
Materials including carbon and fiberglass are added above and below the core to elevate or reduce characteristics such as pop, snap, flex, chatter, and dampness.
The price of every snowboard is a product of the quality of its materials. For example, carbon fiber is considered a premium material, and snowboards with carbon components are known for their stability, power, relatively low weight, and relatively high price tag.
On this list, all of the included snowboards are built from industry-leading, high-quality materials.
Length
Though some riders believe in hard and fast rules for selecting the correct snowboard length, it’s ultimately a matter of personal preference. Board shape, rider height, rider weight, and riding style are all factors that should play into your decision about board length.
Most snowboards come in multiple lengths. Generally, longer boards offer a more aggressive ride and are preferred for hard, large-radius carves. If you’re the kind of rider who likes to absolutely bomb down groomers, we recommend a longer board.
On the other hand, shorter boards are often lighter, better for tight turns, and excellent for floating through powder.
Waist Width
Waist width is the width of a snowboard at its narrowest point. Width preferences vary from rider to rider, though there are a few general rules that are good to keep in mind as you choose a board.
Ideally, the waist width of your snowboard will allow your boots to just slightly hang over the edges of the board when placed in your bindings. When fitted properly, you’ll be able to use the minor overhang of your boots to apply leverage to the board and control your steering and speed.
If your board’s waist width is too narrow, your boots will overhang excessively and your toes may scrape the snow while carving. To determine the ideal waist width for you and your foot side, always check out your board, boot, and binding manufacturers’ sizing charts before purchasing.
Flex and Dampness
The flexibility of a snowboard defines its riding experience. There are two primary kinds of snowboard flex. Longitudinal flex refers to how much the board bends along its length. Torsional flex refers to how much the board bends side to side across its width.
On this list, we’ve given every recommended snowboard a flex rating between 1 (soft and flexible) and 10 (stiff and rigid).
Snowboards on the soft and flexible end of the spectrum are generally geared toward beginners and freestyle riders. These boards require less force to turn and maneuver and are often described as playful. If you’re going to regularly press into butters, you’ll be glad to have a board you don’t have to fight against.
Stiff boards are better for hard-charging and aggressive carving at high speeds. When you’re riding fast, stiff boards will feel more stable as they’re less likely to vibrate and chatter.
Dampness is a positive trait that refers to a board’s ability to cruise at high speeds without sending uncomfortable vibrations into your feet and lower body. As a tradeoff, stiff boards require more work to turn and maneuver, and thus should be avoided by beginners.
Many all-mountain snowboards fall somewhere in the middle of the flexibility spectrum. Not too soft and not too stiff is a good place to be for boards that aim to perform reasonably well on all kinds of terrain.
Boot and Binding Compatibility
Most snowboards are compatible with most snowboard boots and bindings, but there are a few key factors to consider when rounding out your setup. Your boots and bindings should match your riding style and the performance characteristics of your board.
In the same way that some snowboards are designed to thrive in powder, boots and bindings are each uniquely crafted to perform best in certain conditions. If your snowboard is a stiff and aggressive hard-charging monster, you don’t want a pair of soft and flexy boots that are made for the terrain park.
In other words, we recommend you match your board with boots and bindings with similar rigidity. When purchasing boots and bindings, be sure to select sizes that are compatible with the width of your board. You don’t want a binding base or a snowboard boot that hangs off the edge of your snowboard.
Furthermore, make sure that the attachment pattern for your bindings are compatible with your snowboard. Here are several general hole patterns:
- 4×4: two rows of holes that are 4cm apart plus each hole is 4cm apart and three holes per row
- 2×4: two rows of holes that are 2cm apart plus each hole is 2cm apart and six holes per row
- 3-hole: the holes are in a triangular pattern and three screws are used to mount bindings
- Channel system: this is Burton’s specific mounting system where the bindings are mounted to and slide along a track
Effective Edge
This is the portion of the edge that connects with the snow while in a turn, which influences how a board feels. Typically, the effective edge is up to 35 cm shorter than the entire length of the board.
Sidecut and Sidecut Radius
Each side of the board is curved along the edge. The depth and curvature of that sidecut influence the type of turn the board will make as well as how the ride feels. A shallower sidecut makes a wider turn, and a deeper sidecut creates a tighter turn.
To measure the depth of a sidecut, examine the width of the board at its centermost, narrowest point. Then compare that waist to the widest width measurement of the tip and tail.
To conceptualize the complete turn of a snowboard, you can visualize the sidecut extending to create a full 360-degree circle. The sidecut radius is half of that imaginary circle. When riding, each full turn is only as long as the sidecut radius, which usually ranges from 20 to 33 feet.
Sidewalls
The sidewall is the material along the edge of a snowboard. Generally, it’s a plastic that protects the sides of the sandwiched core layers. Or, the fiberglass and topsheet layer could be extended to conceal the edge. The sidewall could also be a hybrid construction.
Snowboard Bases
A snowboard’s base is the layer of material that makes contact with the snow as you ride. In order to get the best performance out of your board, it’s important to take good care of your base, repair it when necessary, and wax it regularly.
There are two kinds of snowboard bases. Each has its own pros and cons.
Extruded Bases
Extruded bases tend to be found on entry-level and park-leaning snowboards. Made from melted polyurethane pellets, these bases are essentially one large piece of flat plastic. Because of this unified structure, extruded bases are durable and not very porous.
The main benefit of extruded bases is they require minimal maintenance. These bases are less likely to suffer gouges from riding over rocks or trees, and they usually only need to be waxed a few times per season.
Most extruded bases come pre-waxed when purchased new. On this list, the Men’s Arbor Foundation is a great board with an extruded base.
Sintered Bases
Sintered bases are found on most midlevel to high-end snowboards. Unlike extruded bases, sintered bases are highly porous.
To keep sintered bases functioning at their best, frequent waxing is essential. Riders with sintered bases should be especially aware of thin spots and obstacles, as the porous material is relatively fragile and can be easily gouged or damaged.
Repairing a sintered base tends to be more expensive than repairing an extruded base. When properly maintained, sintered bases offer a faster ride — especially in wet, sticky snow.
Backcountry Snowboarding and Splitboarding
All of the snowboards on this list have been designed with resort in-bounds riding in mind. With that said, many of them would work for the backcountry if you do not have a splitboard or your tour doesn’t require split-skis. For instance, if you plan to enter a sidecountry gate (aka slackcountry) at a ski resort, be dropped off at the top of a route via vehicle, if you can follow a bootpack up, or if you plan to snowshoe to a slope.
If you’re considering riding in the sidecountry or backcountry, it’s extremely important to be well-prepared. A beacon, shovel, and probe are non-negotiable gear, and an AIARE 1 avalanche safety training course is essential, too.
While strapping a snowboard to your back and hiking through the backcountry in snowshoes is a reasonable short-term plan, most backcountry riders will eventually want to transition to a more efficient splitboard.
Splitboards divide in half and can be used with skins just like backcountry skis. Once you’re ready to descend, the splitboard snaps back together and is ready to ride.
Though splitboarding can be a wonderful way to express your riding skills in the backcountry, the significant learning curve and financial investment required are barriers for many snowboarders.
Eco-Friendly Design Features
Some snowboard designs incorporate sustainable, eco-friendly materials. For example, the Jones Women’s Flagship Snowboard incorporates recycled plastic for the sidewalls. And Lib Tech manufactures snowboards in the U.S.
A leader in the realm of sustainability is Arbor. For instance, the Swoon Rocker has recycled steel edges, sustainably harvested bamboo, and bioresin from waste products that replaces petroleum-based resin. At large, the brand sources materials from highly renewable, well-managed forests.
Arbor’s wood and bamboo cores and the majority of their top sheets are certified by the Forest Stewardship Council, a third-party nod that the materials are derived from responsibly managed forests. Its entire production line is solar-powered, too.
FAQ
An all-mountain snowboard is designed to ride in a wide variety of styles and conditions. While some snowboards are purpose-built for a certain kind of riding — such as park or powder — all-mountain snowboards can handle both and more!
On this list, we’ve selected the Burton Custom Flying V and the Lib Tech Cortado as our picks for the best all-mountain snowboards for beginners. Both of these snowboards are progression-oriented. They’re each relatively easy to control and maneuver, yet they offer high-quality construction and features that will support you as your riding improves.
When you choose a board, the brand will have a recommended size chart based on weight and boot size. You want to be sure to not have any boot drag off the side of the board!
You’ll also want to consider your height and the type of riding you want to do. Back in the day, folks would stand the snowboard next to themselves and if the board reached between the chin and nose, that indicated the correct size. You can get an idea of the snowboard size with that method, but be sure to consider your weight and boot size, too.
Generally, if you want to ride more aggressively and in steeper, faster, rugged conditions, a longer board can help drive more control, damping, and power. A shorter board will be snappier, quicker to steer, and easier to ollie. It’s often a good choice for riding through the park, tight glades, and moguls.
Ultimately, the best size comes down to personal preference, so try to demo or rent a few boards before buying your own.
No all-mountain setup is complete without a good set of boots and bindings. The boots and bindings you choose should be aligned with your riding style and ability.
Just like boards, boots and bindings exist on a spectrum from soft and flexible to stiff and aggressive. Softer boards generally pair well with softer boots and bindings. Similarly, stiff boots and bindings are commonly paired with a stiff board to create the ultimate aggressive and stable riding experience.
Often the biggest differences between men’s and women’s snowboards are sizing and shape. This includes the length, width, and sidecut ratio. Another big difference is the materials sandwiched in the core. Often, brands choose softer woods or laminates to better match the average woman’s stature.
Smaller men might find women’s boards compatible with their ride needs, and taller women also often opt for men’s boards. Ultimately, sizing is about choosing the right board for you and your shred style.
Would you drive your rig without an oil change? Snowboard maintenance is important! Make sure to wax your snowboard on the regular — every few times you ride — with wax that’s temperature-specific to your climate and conditions.
After finishing laps, it’s ideal to wipe down the snowboard, secure the bindings, and hang the board to store it. Make sure the edge stays deburred and sharpened with a whetstone and file.
If the base gets a gouge, you can fill and fix it with P-tex. For larger repairs or general maintenance, take your snowboard to a local shop for a base grind or a full tune.
The Best Snowboard Bindings of 2024
Snowboard bindings are a vital piece of gear that can make or break your time on the mountain. We’ve got the best of 2024 lined up and ready to shred.
The Best Snowboard Boots of 2024
Whether heading into the backcountry or looking for an all-mountain winner, we found the best snowboard boots of 2024.